|
The new ME9601 system, a complete and cost
effective vibration monitor which is installed in three easy stages to give
early warning of excessive vibration levels on all types of rotating plant.
The systems consists of an accelerometer and
a wall-mounted enclosure containing the necessary electronics for operation
as a vibration monitor and alarm system.
Designed as a low cost solution with ease
of application, installation takes just three steps.
1) Fix the accelerometer to the
machine under surveillance,
2) connect this to the ME9601 box, and
3) set the two alarm levels.
The system is then up and running giving
continuous monitoring of machine vibration levels. The unit accepts inputs
of accelerometer, velocity transducer or eddy current/proximity probe, and
has fully adjustable dual level alarms. It can be selected to monitor
acceleration, velocity or
displacement in either peak or RMS values and has hi and low filters
selectable between 5Hz and 10 kHz.
To learn more, please contact us at
409-286-5988, or international customers can reach us at 409-286-5221. |
Built into a robust enclosure rated to IP66, the unit also provides a
digital display for setting of range and alarm levels together with recorder
outputs of current (4-20mA, or 0-10mA), and voltage (0-1V, 0-10V, 1-5V or
buffered signal).
The dual alarms, when exceeding their preset values, activate relays which
can be used for operation of visual or audible warning equipment, or for
immediate plant shutdown. Other units are also available to monitor eddy
current probes, displacement, rolling element bearing condition and
rotational
speed. |
![[New!]](images/smallnew.gif){kind=small}
